GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander 🢒 Engine 🢒 Engine Mechanical - 3.9L 🢒 Battery Negative Cable Disconnection and Connection

Battery Negative Cable Disconnection and Connection for Chevrolet Uplander 2009

Removal Procedure

Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1544743 Size: SH
  1. Record all presets and theft codes from the radio.
  2. Turn off all the lamps and accessories.
  3. Turn the ignition OFF.
  4. Loosen the negative battery cable (2) nut.
  5. Remove the negative battery cable from the battery.

Installation Procedure

    Object Number: 1544743 Size: SH

    Note: Clean any existing corrosion from the battery terminal bolt and the battery cable.

  1. Install the negative battery cable to the battery.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Tighten the negative battery cable (2) nut and tighten to 16 N·m (12 lb ft) .
  3. Reprogram the radio presets. Refer to Radio Programming and Setup .
  4. Re-initialize the power sliding doors. Refer to Rear Side Door Actuator Control Module Programming and Setup .