GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 OnStar Button Assembly Replacement

Removal Procedure

    Object Number: 1530697 Size: SH
  1. Remove the courtesy lamp lens.
  2. Remove the screw near the courtesy lamp.
  3. Grasp the overhead console and pull downward in order to disengage the fasteners.
  4. Disconnect the electrical connectors from the overhead console.

    5. Object Number: 1530702 Size: SH
  5. Remove the screws securing the OnStar® button assembly (4) to the overhead console.
  6. Remove the OnStar® Microphone from the OnStar® button assembly. Refer to Mobile Telephone Microphone Replacement .

Installation Procedure

    Object Number: 1530702 Size: SH
  1. Install the OnStar® Microphone into the OnStar® button assembly. Refer to Mobile Telephone Microphone Replacement .
  2. Position the OnStar® button assembly (4) to the overhead console.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the screws to secure the OnStar® button assembly to the overhead console and tighten to 2 N·m (18 lb in) .

    4. Object Number: 1530697 Size: SH
  4. Connect the electrical connectors.
  5. Align the overhead console within the vehicle.
  6. Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
  7. Install the overhead console screw and tighten to 2 N·m (18 lb in) .
  8. Install the courtesy lamp lens.