GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Horn Replacement

Removal Procedure
  1. Remove the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement .

    2. Object Number: 1480005 Size: SH
  2. Disconnect the horn electrical connector.
  3. Remove the horn bracket bolt (1) to impact bar.
  4. Remove the horn (2) from the front impact bar.

Installation Procedure

    Object Number: 1480005 Size: SH
  1. Position the horn (2) to the front impact bar.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the horn bracket bolt (1) and tighten to 15 N·m (11 lb ft) .
  3. Connect the horn electrical connector.
  4. Install the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement .