For 1990-2009 cars only
Removal Procedure
- Remove the upper garnish molding from the body side rear. Refer to Body Lock Pillar Upper Trim Panel Replacement .
- Remove the bearing bushing screw.
- Remove the retaining nuts from the hinge studs on the rear quarter window.
- Remove the rear quarter window from the vehicle.
Installation Procedure
- Install the rear quarter window to the vehicle.
- Install the retaining nuts to the hinge studs on the rear quarter window and tighten to 10 N·m (89 lb in) .
- Install the bearing bushing retaining screw and tighten to 2 N·m (18 lb in) .
- Install the upper garnish molding top the body side rear. Refer to Body Lock Pillar Upper Trim Panel Replacement .
Caution: Refer to Fastener Caution in the Preface section.
