GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Cable Equalizer Replacement

Removal Procedure

    Warning: Refer to Park Brake Cable to Caliper Warning in the Preface section.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 732929 Size: SH
  2. Disconnect the park brake cable and adjustment stud assembly from the equalizer assembly by removing the equalizer nut from the adjustment stud.

    3. Object Number: 717002 Size: SH
  3. Disconnect the front park brake cable (1) from the rear park brake cable (3) at the connector clip (2).
  4. Remove the equalizer assembly from the park brake cable.

Installation Procedure
  1. Install the equalizer assembly to the front park brake cable.

    2. Object Number: 717002 Size: SH
  2. Connect the front park brake cable (1) to the rear park brake cable (3) at the connector clip (2).

    3. Object Number: 732929 Size: SH
  3. Connect the park brake cable and adjustment stud assembly to the equalizer assembly by installing the equalizer adjustment nut.
  4. Adjust the Park Brake System. Refer to Park Brake Adjustment .
  5. Lower the vehicle.