For 1990-2009 cars only
Special Tools
| • | J-8092 Driver Handle |
| • | J-28677 Drive Sprocket Support Bearing Installer |
| • | J-36850 Transmission Assembly Lubricant |
For equivalent regional tools, refer to Special Tools.
- Assemble J-28677 bearing installer and J-8092 driver handle .
- Lubricate drive sprocket support bearing (521) with J-36850 lubricant .
- Using the assembled tool, press in the drive sprocket support bearing (521).
- Install the drive sprocket support assembly (522).
- Install the four drive sprocket support bolts (524) and tighten to 25 N·m (18 lb ft).
Note: When installing the new bearing the part number should be visible (facing upward).
Caution: Refer to Fastener Caution in the Preface section.
