Body Control Module Replacement. Chevrolet Uplander 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Body Control Module Replacement

Callout	Component Name
Preliminary Procedure Remove the drivers side instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement .
1	Body Control Module Screws (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb ft)
2	Body Control Module Tip Disconnect the electrical connectors. Reprogram the body control module. Refer to Control Module References for programming and setup information.

Callout

Component Name

Remove the drivers side instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement .

Body Control Module Screws (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb ft)

Body Control Module

Tip

Disconnect the electrical connectors.
Reprogram the body control module. Refer to Control Module References for programming and setup information.