GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Sit-N-Lift Control Module Replacement

Removal Procedure
  1. Remove the upper seat trim. Refer to Sit-N-Lift Upper Trim Replacement .

    2. Object Number: 1368553 Size: SH
  2. Remove the fasteners from the module bracket.

    3. Object Number: 1368564 Size: SH
  3. Disconnect the electrical connectors from the module.

    4. Object Number: 1368566 Size: SH
  4. Remove the module from the seat base.

Installation Procedure

    Object Number: 1368564 Size: SH
  1. Align the module with the seat base and connect the electrical connectors to the module.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1368553 Size: SH
  2. Install the module bracket and secure with fasteners and tighten to 2 N·m (18 lb in) .
  3. Test the module for proper operation.
  4. Install the upper seat trim. Refer to Sit-N-Lift Upper Trim Replacement .