Sit-N-Lift Chain Cover Replacement for Chevrolet Uplander 2009

1. Extend the seat out from the vehicle.



2. Remove the fasteners from the rear of the seat.



3. Remove the screws from the roll-up chain cover.
4. Remove the chain cover.

1. Install the roll-up chain cover.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the screws to the chain cover and tighten to 2 N·m (18 lb in) .



3. Install the fasteners to the rear of the seat.
4. Return the seat to the vehicle.
5. Test the seat for proper operation.