GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Uplander Ext. 🢒 Engine 🢒 Engine Mechanical - 3.5L (LX9) 🢒 Engine Mount Strut Bracket Replacement - Left Side

Removal Procedure

    Object Number: 105883 Size: SH
  1. Remove the left engine mount strut from the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side .
  2. Remove the thermostat housing. Refer to Engine Coolant Thermostat Replacement in Engine Cooling.

    3. Object Number: 61845 Size: SH
  3. Remove the engine mount strut bracket bolts from the left engine mount strut bracket to the cylinder head.
  4. Remove the left engine mount strut bracket.

Installation Procedure

    Object Number: 61845 Size: SH
  1. Install the left engine mount strut bracket.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the engine mount strut bracket bolts through the engine mount strut bracket to the cylinder head.

    3. Tighten
    Tighten the engine mount strut bracket bolts to 70 N·m (52 lb ft).

  3. Install the thermostat housing. Refer to Engine Coolant Thermostat Replacement in Engine Cooling.

    4. Object Number: 105883 Size: SH
  4. Install the left engine mount strut to the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side .