Tools Required
J 38606
Valve Spring Compressor
- Remove the heater inlet pipe stud from the right cylinder head, if required.
- Remove the coolant temperature sensor from the right cylinder head, if required.
- Remove the cylinder head plug.
- Compress the valve springs using the
J 38606
.
Notice: Do not damage the valve guide. Remove any burrs that have formed at
the key groove by chamfering the valve stem with an oil stone or a file.
Important: Ensure that the valve train components are marked, organized or sorted when disassembling the cylinder head. Install the valve train components in the original location from which the component were removed.
- Remove the valve spring cap keys.
- Remove the valve spring caps.
- Remove the valve springs.
- Remove the valves.
- Remove the valve stem oil seals and spring seats as an assembly.