GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Uplander Ext. 🢒 Engine 🢒 Engine Exhaust 🢒 Exhaust System Insulator, Hanger, Bracket Replacement

Removal Procedure

    Object Number: 1544741 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the exhaust insulators (1) from the exhaust system (2) and vehicle body if replacement of insulator is necessary.

    3. Object Number: 1544740 Size: SH
  3. Remove the exhaust system hanger bolts (2).
  4. Remove the exhaust system hanger (1).

Installation Procedure

    Object Number: 1544740 Size: SH
  1. Install the exhaust system hanger (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the exhaust system hanger bolts (2).

    3. Tighten
    Tighten the bolts to 35 N·m (26 lb ft).


    Object Number: 1544741 Size: SH
  3. Install any exhaust insulators (1) to the exhaust system (2) and vehicle body if replacement of insulator was necessary.
  4. Lower the vehicle.