Removal Procedure
- Remove the upper garnish molding from the body side rear. Refer to
Body Lock Pillar Upper Trim Panel Replacement
.
- Remove the bearing bushing screw.
- Remove the retaining nuts from the hinge studs on the rear quarter window.
- Remove the rear quarter window from the vehicle.
Installation Procedure
- Install the rear quarter window to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining nuts to the hinge studs on the rear quarter window.
Tighten
Tighten the nuts to 10 N·m (89 lb in).
- Install the bearing bushing retaining screw.
Tighten
Tighten the screw to 2 N·m (18 lb in).
- Install the upper garnish molding top the body side rear. Refer to
Body Lock Pillar Upper Trim Panel Replacement
.