Tools Required

J 38778 Door Trim Pad Clip Remover

1. Remove the sliding door water deflector. Refer to Rear Side Door Water Deflector Replacement .



2. Using the J 38778 , remove the sliding door jamb contact plate push-in retainers.
3. Disconnect the sliding door jamb contact plate electrical connector.
4. Remove the sliding door jamb contact plate from the lower door.

1. Connect the sliding door jamb contact plate electrical connector.
2. Position the sliding door jamb contact plate to the lower door.
3. Install the sliding door jamb contact plate push-in retainers.
4. Install the sliding door water deflector. Refer to Rear Side Door Water Deflector Replacement .