Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Headlights/Daytime Running Lights (DRL) Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Do the high beam headlamps illuminate during flash to pass operation? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Do the high beam headlamps operate properly? | Go to Step 4 | |
4 |
Do the high beam headlamps illuminate? | Go to Step 5 | Go to Step 6 |
5 | Inspect for poor connections at the harness connector of the multifunction switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 8 | Go to Step 7 |
6 | Repair a high resistance, or an open in the flash to pass switch signal circuit of the headlamp dimmer switch. Refer to Circuit Testing and Wiring Repairs . Did you complete the repair? | Go to Step 8 | -- |
7 | Replace the multifunction turn signal switch. Refer to Turn Signal Multifunction Switch Replacement . Did you complete the repair? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |