For 1990-2009 cars only
Circuit Description
The System OK code is used to identify that the self test has found no faults with the automatic level control system.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC 012 System OK
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
No DTCs are set after self test has been completed.
Action Taken When the DTC Sets
Automatic level control system functions normally.
Conditions for Clearing the DTC
The conditions that caused the DTC to set have been removed.
Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Automatic Level Control Schematics | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | The automatic level control system is functioning normally. Is this code present after self test? | System OK | -- |
