GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls - 3.5L (LX9).
  2. Remove the automatic transaxle range selector lever cable from the cable lever.

  3. Object Number: 161083  Size: SH
  4. Remove the automatic transaxle range selector lever nut.
  5. Remove the automatic transaxle range selector lever.

Installation Procedure


    Object Number: 161083  Size: SH
  1. Install the automatic transaxle range selector lever.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the automatic transaxle range selector lever nut.
  4. Tighten
    Tighten the automatic transaxle range selector lever nut to 32 N·m (23 lb ft).

  5. Install the automatic transaxle range selector lever cable to the automatic transaxle range selector lever.
  6. Install the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls - 3.5L (LX9).