Tools Required
J 39637
Wiper Arm Puller
Removal Procedure
- Open and support the hood.
- Disconnect the washer hose from the front washer pump hose (5).
- Remove the wiper arm nut cover (3).
- Remove the wiper arm nut (4).
- Using the
J 39637
, remove the wiper arm from the wiper drive system module.
- Remove the wiper blade from the wiper arm connection.
Installation Procedure
- Install the wiper blade onto the wiper arm.
- Position the wiper arm onto the wiper arm pivot shaft.
- Align the wiper blade tip to the horizontal mark on the windshield within the blackout area (a or b).
Notice: Refer to Fastener Notice in the Preface section.
Important: Hold the wiper arm into position (1) while tightening the nut.
- Install the wiper arm nut (4).
Tighten
Tighten the nut to 30 N·m (22 lb ft).
- Install the wiper arm nut cover (3).
- Connect the washer nozzle hose to the washer pump hose (5).
- Close the hood.
- Inspect the wipers for proper operation.