GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Uplander Ext. 🢒 Engine 🢒 Engine Mechanical - 3.9L 🢒 Engine Mount Strut Bracket Replacement - Upper Radiator Support

Removal Procedure

    Object Number: 1675030 Size: SH
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Loosen and remove the engine mount strut to engine mount strut bracket through bolts (1, 3) and nuts (2, 4).
  3. Rotate the engine mount struts up out of the way.

    4. Object Number: 1675031 Size: SH
  4. Remove the engine mount strut bracket bolts (1, 2).
  5. Remove the engine mount strut brackets (3, 4).

Installation Procedure

    Object Number: 1675031 Size: SH
  1. Position the engine mount strut brackets to the radiator support (3, 4).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the engine mount strut bracket bolts (1, 2).

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).


    Object Number: 1675030 Size: SH
  3. Rotate the engine mount struts into position.
  4. Install and tighten the engine mount strut to engine mount strut bracket through bolts (1, 3) and nuts (2, 4).

    5. Tighten
    Tighten the bolt/nut to 48 N·m (36 lb ft).

  5. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .