- Install the coolant crossover pipe gaskets and the coolant crossover pipe assembly onto the engine.
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine lift bracket (1) and the front coolant crossover pipe bolts (4).
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
- Install the side coolant crossover pipe bolt (2).
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Install the thermal bypass hose (3) and securely fasten the hose clamp.
- Install the idler pulleys and bolts.
Tighten
• | Tighten the bolts (1) to 50 N·m (37 lb ft). |
• | Tighten the bolt (2) to 30 N·m (22 lb ft). |