GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Uplander Ext. 🢒 Engine 🢒 Engine Mechanical - 3.9L 🢒 Power Steering Pump Pulley Replacement

Object Number: 1831494 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the washer solvent container. Refer to Windshield Washer Solvent Container Replacement .
  2. Remove the drive belt. Refer to Drive Belt Replacement .

1

Power Steering Pump Pulley

Procedure

  1. Use remover J 37609-A to remove the power steering pump pulley.
  2. Use installer J 25033-C to install the power steering pump pulley.

Tip
During installation make sure the face of the power steering pump pulley hub is flush with the end of the power steering pump shaft.

Special Tools

    • J 37609-A Power Steering Pump Pulley Remover
    • J 25033-C Pulley Installer