GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Uplander Ext. 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure
  1. Remove the left cowl side panel. Refer to Cowl Side Trim Panel Replacement .

    2. Object Number: 181465 Size: SH
  2. Remove the park brake indicator switch electrical connector.
  3. Remove the park brake indicator switch screw.
  4. Remove the parking brake indicator switch.

Installation Procedure
  1. Install the park brake indicator switch.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the park brake indicator switch screw.

    3. Tighten
    Tighten the screw to 3 N·m (27 lb in).


    Object Number: 181465 Size: SH
  3. Install the park brake indicator switch electrical connector.
  4. Install the left cowl side panel. Refer to Cowl Side Trim Panel Replacement .