Callout
| Component Name
|
Caution: Following the deployment of a side impact air bag, inspect the following
parts for damage. Replace these parts if necessary:
ā¢ | The seat cushion frame |
ā¢ | The seat recliner, if equipped |
Failure to do so may cause future personal injury.
- Disable the SIR, if equipped. Refer to
SIR Disabling and Enabling
.
- Remove the rear seat from the vehicle. Refer to
Rear Seat Replacement
.
- Remove the rear seat back panel. Refer to
Rear Seat Back Cushion Trim Panel Replacement
.
|
1
| Armrest Assembly
Refer to
Rear Seat Armrest Replacement
.
|
2
| Head Restraint Assembly
Refer to
Front Seat Head Restraint Replacement
.
|
3
| Seat Back Cushion Cover
Refer to
Rear Seat Back Cushion Cover and Pad Replacement
.
|
4
| Side Impact Inflatable Restraint Nut (Qty: 2)
Notice: Refer to Fastener Notice in the Preface section.
Tighten 5 NĀ·m (44 lb in) |
5
| Inflatable Restraint Module Assembly
Tip
- Disconnect the electrical connector.
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to
Inflator Module Handling and Scrapping
.
|
6
| Side Impact Air Bag Escutcheon Cover
|