Removal Procedure
- Open the fuel filler door.
- Remove the fuel cap.
- Remove the screws (3, 4) securing the fuel filler pocket (1) to the left rear inner body panel (2).
- Remove the screws from the fuel filler pocket.
- Remove the push-pin retainer from the inner wheel well to pocket.
- Remove the fuel filler pocket (1) from the vehicle.
- Depress tabs on the fuel cap tether and remove from the fuel filler pocket.
Installation Procedure
- Align the fuel filler pocket (1) to the body panel (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (3, 4) to the fuel filler pocket to the left body panel.
Tighten
Tighten the screws to 10 N·m (89 lb in).
- Install the push in retainer to the fuel filler pocket.
- Install the fuel cap to the fuel filler pocket.
- Close the fuel filler door.