GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Uplander Ext. 🢒 Seats 🢒 Power Seats 🢒 Sit-N-Lift Remote Control Replacement

Removal Procedure

    Object Number: 1368170 Size: SH
  1. Remove the right side upper trim panel from the seat base.
  2. Disconnect the retainers holding the cable to the upper trim panel.
  3. Remove the rear trim panel from the seat base.

    4. Object Number: 1368543 Size: SH
  4. Disconnect the electrical connector from the seat base.

    5. Object Number: 1368565 Size: SH
  5. Remove the remote control and the chord from the vehicle.

Installation Procedure

    Object Number: 1368565 Size: SH
  1. Install the remote control and the chord to the seat base.

    2. Object Number: 1368543 Size: SH
  2. Connect the electrical connector to the seat base.

    3. Object Number: 1368170 Size: SH
  3. Install the rear trim panel to the seat base.
  4. Connect the retainers holding the cable to the upper trim panel.
  5. Install the right side upper trim panel to the seat base.
  6. Test the seat for proper operation.