GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 Engine 🢒 Engine Controls and Fuel - 3.9L 🢒 Range Selector Lever Cable Bracket Replacement

Removal Procedure
  1. Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement .
  2. Use a flat-bladed tool in order to remove the automatic transaxle range selector cable from the cable lever and the bracket. Refer to Range Selector Lever Cable Replacement .

    3. Object Number: 161088 Size: SH
  3. Remove the automatic transaxle range selector cable bracket bolts.
  4. Remove the automatic transaxle range selector cable bracket.

Installation Procedure

    Object Number: 161088 Size: SH
  1. Install the automatic transaxle range selector cable bracket.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the automatic transaxle range selector cable bracket bolts and tighten to 25 N·m (18 lb ft) .
  3. Install the automatic transaxle range selector cable to the cable lever and the bracket. Refer to Range Selector Lever Cable Replacement .
  4. Adjust the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Adjustment .
  5. Install the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement.