For 1990-2009 cars only
Removal Procedure
- Remove the courtesy lamp lens.
- Remove the overhead console screw.
- Grasp the overhead console and pull downward in order to disengage the fasteners.
- Disconnect the electrical connectors from the overhead console.
- Remove the power sliding door on/off multifunction switch (5) by using pliers in order to compress the retainers while pulling the switch away from the housing.
Installation Procedure
- Snap the power sliding door on/off multifunction switch (5) into the opening in the overhead console.
- Connect the electrical connectors.
- Align the overhead console within the vehicle.
- Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
- Install the overhead console screw and tighten to 2 N·m (18 lb in) .
- Install the courtesy lamp lens.
Caution: Refer to Fastener Caution in the Preface section.
