Preliminary Procedure

Remove the seat belt retractor trim cover. Refer to Rear Seat Belt Retractor Trim Cover Replacement .

1

Inflator Solenoid Fill Valve Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

2

Inflator Solenoid Nut

Procedure

1. Access the solenoid through the seat belt trim cover opening.
2. Disconnect the inflator solenoid electrical connector.
3. Disconnect the inflator solenoid air lines from the solenoid.

Tighten
3 N·m (27 lb in)

3

Inflator Solenoid

Tip
Remove the inflator solenoid from the rear quarter trim panel.