Tail Lamp Assembly Replacement

1

Screw, Tail Lamp (Qty: 4)

Tip
Open the liftgate to gain access to the screws.

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Lamp Assembly, Tail (Qty: 2)

Tip

1. Pull the tail lamp rearward to disengage the 2 retainers on the back side of the tail lamp.
2. Disconnect the electrical connector.
3. Remove and replace the bulbs, if necessary.
4. Remove and replace the tail lamp wiring harness, if necessary.