For 1990-2009 cars only
Removal Procedure
- Using a small, flat-bladed tool, remove the coat hook access hole cover from the roof side rail lamp.
- Remove the screws from the roof side rail lamp.
- Remove the roof side rail lamp from the roof.
- Disconnect the electrical connectors from the roof side rail lamp.
Installation Procedure
- Connect the electrical connectors to the roof side rail lamp.
- Install the roof side rail lamp to the roof.
- Install the screws to the roof side rail lamp and tighten to 2 N·m (18 lb in) .
- Snap the coat hook access hole cover back into place on the roof side rail lamp.
Caution: Refer to Fastener Caution in the Preface section.
