Special Tools

J-39822 Wiper Arm Puller

1. Ensure the wiper is placed in the park position.



2. Disengage the finish cover (3) from the wiper arm (5).
3. Remove the wiper arm pivot nut (4).
4. Using the J-39822 Puller , remove the rear wiper arm.
5. Remove the rear wiper blade from the rear wiper arm. Refer to Rear Window Wiper Blade Replacement .

1. Install the rear wiper blade onto the rear wiper arm. Refer to Rear Window Wiper Blade Replacement .

Caution: Refer to Fastener Caution in the Preface section.

2. Position the rear wiper arm onto the wiper motor pivot shaft 45 mm (1.77 in) from the bottom edge of the glass (1).
3. Install the rear wiper arm nut and tighten to 25 N·m (19 lb ft) .
4. Connect the rear wiper arm finish cover (3).
5. Inspect the rear wiper system for proper operation.