GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 Transmission 🢒 Automatic Transmission - 4T65-E 🢒 Torque Converter Fluid Seal Removal

Special Tools
    • J 41103 Torque Converter Seal Remover Set which contains:
    • J 41103-1 Torque Converter Seal Puller Legs
    • J 41103-2 Torque Converter Seal Puller Bridge
    • J 41103-3 Torque Converter Seal Support Body

For equivalent regional tools, refer to Special Tools.


    Object Number: 1239231 Size: SH
  1. Insert the three J 41103-1 puller legs under the Torque Converter Seal (525).
  2. Insert the J 41103-3 support body over the drive sprocket support (522).
  3. Insert the J 41103-2 puller bridge over the J 41103-3 support body . Connect the J 41103-1 puller legs into the slots on the J 41103-2 puller bridge .

    4. Note: The puller legs will damage the torque converter seal (525). Discard the torque converter seal (525) after removal.

  4. Tighten the forcing screw on the J 41103-2 puller bridge until the J 41103-1 puller legs remove the torque converter seal (525).