Case Cover Bearing Assemble. Chevrolet Uplander Ext. 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 Transmission 🢒 Automatic Transmission - 4T65-E 🢒 Case Cover Bearing Assemble

•	J 8092 Universal Driver Handle

•	J 41991 Driveshaft Bearing Remover/Installer

For equivalent regional tools, refer to Special Tools.

Assemble J 8092 driver handle and J 41991 bearing remover/installer for bearing installation.
Place the case cover (400) on a clean, flat surface with the case mating surface up.

Note: When installing the new bearing the part number should be visible (facing upward).

Using the assembled tool, press the drive shaft bearing (431) into the case cover (400).