For 1990-2009 cars only
- Inspect the vehicle speed sensor assembly (10) and the vehicle speed sensor O-ring seal (11) for the following conditions:
- Install a new O-ring seal (11) on the vehicle speed sensor assembly (10).
- Install the vehicle speed sensor assembly (10) into the case extension.
- Install the vehicle speed sensor bolt (9) and tighten to 12 N·m (106 lb in).
Note: Handle the vehicle speed sensor assembly carefully.
| • | Damaged connector |
| • | Cracked housing |
| • | Signs of rotor damage |
| • | Cuts or nicks on the O-ring seal |
Caution: Refer to Fastener Caution in the Preface section.
