For 1990-2009 cars only
- Inspect the oil pan (24) for the following conditions:
- Inspect the oil pan gasket (25) for the following conditions:
- Inspect the oil pan magnet (26) for damage or misalignment
- Clean the oil pan (24), the oil pan gasket (25) and the oil pan magnet (26) in order to remove any sediment.
- Position the transmission so that the oil pan sealing surface is facing upward.
- Lubricate the oil filter seal assembly (101) with transmission fluid.
- Using a socket and a plastic mallet, gently tap the oil filter seal assembly (101) into the case (3).
- Install the oil filter assembly (100) into the case (3).
- Install the oil pan gasket (25) onto the case (3). The old gasket is reusable if the gasket is not damaged.
- Install the oil pan (24) onto the case (3).
- Install the 20 oil pan bolts (23) and tighten to 14 N·m (10 lb ft).
| • | A damaged sealing surface |
| • | A dented or cracked bottom surface |
| • | A bent or damaged seal core |
| • | A damaged rubber seal surface |
| • | A damaged gasket |
Caution: Refer to Fastener Caution in the Preface section.
