Preliminary Procedures

1. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
2. Disconnect the electrical connector to door lock cylinder, if equipped.
3. Using a small flat-bladed tool, press in on the retaining tabs to release the front door window from the front door window sash.
4. Slide the glass full up and tape in place.

1

Access Cover Plug

Tip
Remove the plug to access the upper rear door handle bolt.

2

Front Door Handle Bolts (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

3

Front Outside Door Handle

Tip
Partially remove in order to access the door handle latch and lock rods.

4

Front Door Lock Rod

Tip
Disconnect the lock rod from the outside handle lock cylinder.

5

Front Door Latch Handle Rod

Tip
Disconnect the latch rod from the outside handle.