Adjustment Procedure
- Loosen the 13 mm bolts from the upper and lower door side hinge.
DO NOT remove the bolts.
- Adjust the door as needed by repositioning the door in the following manner:
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Retighten the 13 mm upper bolts (1, 2). Tighten in sequence as shown to
33 N·m (24 lb ft).
- Retighten the 13 mm lower bolts (3, 4). Tighten to
33 N·m (24 lb ft).
- Verify the door adjustment, repeat if needed.
- Open and close the door.