GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Fuel Tank Filler Pipe Housing Replacement

Removal Procedure

    Object Number: 1479949 Size: SH
  1. Open the fuel filler door.
  2. Remove the fuel cap.
  3. Remove the screws (3, 4) securing the fuel filler pocket (1) to the left rear inner body panel (2).
  4. Remove the screws from the fuel filler pocket.
  5. Remove the push-pin retainer from the inner wheel well to pocket.
  6. Remove the fuel filler pocket (1) from the vehicle.
  7. Depress tabs on the fuel cap tether and remove from the fuel filler pocket.

Installation Procedure

    Object Number: 1479949 Size: SH
  1. Align the fuel filler pocket (1) to the body panel (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the screws (3, 4) to the fuel filler pocket to the left body panel and tighten to 10 N·m (89 lb in) .
  3. Install the push in retainer to the fuel filler pocket.
  4. Install the fuel cap to the fuel filler pocket.
  5. Close the fuel filler door.