Preliminary Procedures

1. Remove the hood hinge. Refer to Hood Hinge Replacement .
2. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
3. Remove the headlamp. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement .
4. Remove the antenna on passenger fender. Refer to Radio Antenna Replacement .

1

Front Fender Upper Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

2

Front Fender Rear Bolt (Qty: 3)

Tighten
8 N·m (71 lb in)

3

Front Fender Lower Rear Bolt

Tip
Reposition the rocker panel molding to gain access to the bolt.

Tighten
8 N·m (71 lb in)

4

Front Fender Lower Front Bolt

Tighten
8 N·m (71 lb in)

5

Front Fender Upper Front Bolt

Tighten
6 N·m (53 lb in)

6

Front Fender Front Lower Bracket Nut (Qty: 2)

Tip
Loosen the nut enough to allow the fender to slide out of the slots.

Tighten
6 N·m (53 lb in)

7

Front Fender Assembly