GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 HVAC Control Module Replacement

Removal Procedure

    Object Number: 1547652 Size: SH
  1. Remove the instrument panel (I/P) accessory trim plate.
  2. Remove the HVAC control module bolts/screws.
  3. Pull the HVAC control module straight out from the I/P.
  4. Disconnect the HVAC control module electrical connectors.

Installation Procedure

    Object Number: 1547652 Size: SH
  1. Connect the HVAC control module electrical connectors.
  2. Install the HVAC control module into the I/P opening.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the HVAC control module bolts/screws and tighten to 2.5 N·m (22 lb in) .
  4. Install the I/P accessory trim plate.
  5. Re-calibrate the actuators. Refer to Actuator Recalibration .
  6. Refer to Control Module References for programming and setup information.