Preliminary Procedures

1. Remove the seat from the vehicle.
2. Remove the seat back cover and pad. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
3. Remove the seat cushion frame. Refer to Rear Seat Number 2 Cushion Frame Replacement .
4. Remove the center seat belt retractor. Refer to Seat Belt Retractor Replacement - Center Rear .

1

Seat Back Latch Cover Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear Seat Hinge Finish Cover

3

Rear Seat Hinge Finish Cover

Tip
Grasp the cover and pull it away from the assembly to release the retainer clips.

4

Seat Back Cushion Frame Bolt (Qty: 3)

Tighten
9 N·m (80 lb in)

5

Seat Back Cushion Frame Assembly

6

Seat Back Latch Assembly Bolt (Qty: 4)

Tighten
9 N·m (80 lb in)

7

Seat Back Latch Assembly