Removal Procedure
- Remove the accessory panel from the left rear quarter trim. Refer to
Rear Quarter Trim Panel Replacement - Left Side.
- Disconnect the auxiliary blower motor resistor electrical connector.
- Remove the auxiliary blower motor resistor screws.
- Remove the auxiliary blower motor resistor from the auxiliary HVAC module assembly.
Installation Procedure
- Install the auxiliary blower motor resistor to the auxiliary HVAC module assembly.
Caution: Refer to Fastener Caution in the Preface section.
- Install the auxiliary blower motor resistor screws and tighten to
1.6 N·m (14 lb in)
.
- Connect the auxiliary blower motor resistor electrical connector.
- Install the accessory panel from the left rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Left Side.