GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1548556  Size: SH
  1. Remove the drive side knee bolster.
  2. Locate the defrost actuator (1).
  3. Disconnect the defrost actuator electrical connector (2).

  4. Object Number: 1548540  Size: SH
  5. Remove the defrost actuator bolts/screws (4).
  6. Remove the defrost actuator (3).

Installation Procedure


    Object Number: 1548540  Size: SH
  1. Install the defrost actuator (3).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the defrost actuator bolts/screws (4) and tighten to 1.2 N·m (11 lb in) .

  4. Object Number: 1548556  Size: SH
  5. Connect the defrost actuator electrical connector (2).
  6. Install the driver side knee bolster.
  7. Re-calibrate the actuators. Refer to Actuator Recalibration .