Preliminary Procedure

Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .

1

Shoulder Belt Guide Trim Cover

2

Shoulder Belt Guide Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
29 N·m (31 lb ft)

3

Shoulder Belt Guide

4

Center Pillar Upper Trim Panel

Refer to Center Pillar Upper Trim Panel Replacement .

5

Center Pillar Lower Trim Panel

Refer to Center Pillar Lower Trim Panel Replacement .

Tip
Lift the trim panel up enough to access the seat belt retractor bolt.

6

Driver Seat Belt Retractor Bolt

Tighten
43 N·m (3 lb ft)

7

Shoulder Belt Retractor Bezel

8

Driver Seat Belt Assembly

Procedure

1. Remove the seat belt anchor from the seat stud.
2. Remove the seat belt and lower trim panel as an assembly.
3. Slide the bezel up and remove the belt from the lower trim panel.