GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Uplander - 4WD 🢒 Engine 🢒 Engine Electrical 🢒 Generator Bracket Replacement

Removal Procedure
  1. Remove the generator. Refer to Generator Replacement .
  2. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .

    3. Object Number: 1239046 Size: SH
  3. Remove the generator bracket bolts.
  4. Remove the generator bracket.

Installation Procedure

    Object Number: 1239046 Size: SH
  1. Install the generator bracket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the generator bracket bolts.

    3. Tighten
    Tighten the generator bracket bolts in the sequence shown to 50 N·m (37 lb ft).

  3. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  4. Install the generator. Refer to Generator Replacement .