Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition ON/Engine OFF | |||
Battery Voltage | Data | Volts | 12.6 Volts |
Regulated Voltage Control Current Sensor | Data | % | Varies |
Starter Switch | Inputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition ON/Engine OFF | |||
Battery Voltage | Data | Volts | 12.6 Volts |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition ON/Engine OFF/Transmission in Park | |||
GEN L-Terminal Signal Command | Engine Data 2 | On/Off | Off |
Ignition 1 Signal | Engine Data 1, Engine Data 2 | Volts | 12.6 Volts |
Crank Request Signal | Engine Data | Yes/No | No |
IMS | Transmission Data | Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, INVALID, OPEN | Park |
Starter Relay Circuit History | Outputs | OK/Fault/Invalid State | OK |
Starter Relay Command | Engine Data 2 | On/Off | Off |