GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Uplander - 4WD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) upper trim. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages, and Console.

    2. Object Number: 315296 Size: SH
  2. Disengage the retaining tabs in order to remove the door lock receiver from the I/P upper trim.
  3. Disconnect the electrical connector from the door lock receiver.

Installation Procedure

    Object Number: 315296 Size: SH
  1. Connect the electrical connector to the door lock receiver.
  2. Engage the retaining tabs in order to install the door lock receiver to the I/P upper trim.
  3. Install the I/P upper trim. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages, and Console.
  4. Program transmitter to the new receiver. Refer to Control Module References for programming and setup information.