Application | Specification | |||||||
---|---|---|---|---|---|---|---|---|
Metric | English | |||||||
Ball Stud Castle Nut - Lower Control Arm | ||||||||
| 30 N·m | 22 lb ft | ||||||
| Plus 135° | |||||||
Ball Stud Nuts - Replacement Ball Joint¹ | 68 N·m | 50 lb ft | ||||||
Lower Control Arm Nuts - at Frame¹ | 96 N·m | 71 lb ft | ||||||
Stabilizer Shaft Insulator Bracket Bolts | 48 N·m | 35 lb ft | ||||||
Stabilizer Shaft Link Nut - With Rear Twist Axle | 45 N·m | 33 lb ft | ||||||
Stabilizer Shaft Link Nut - With Rear IRS | 19 N·m | 14 lb ft | ||||||
Strut Lower Nuts - at Knuckle¹ | 112 N·m | 83 lb ft | ||||||
Strut Shaft Nut¹ | 85 N·m | 63 lb ft | ||||||
Strut Upper Nuts | 30 N·m | 22 lb ft | ||||||
Wheel Bearing/Hub Bolts - NEW ONLY | 130 N·m | 96 lb ft | ||||||
¹ This is a prevailing torque type fastener. This fastener may be reused ONLY if:
If the fastener does not meet these criteria, REPLACE the fastener. |