Callout
| Component Name
|
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications:
Refer to
Fastener Tightening Specifications
.
|
Instrument Panel (I/P) Carrier Trim Cover Replacement
Preliminary Procedures
- Disable the SIR. Refer to
SIR Disabling and Enabling
and
SIR Disabling and Enabling
.
- Remove the instrument panel (I/P) insulators. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P compartment assembly. Refer to
Instrument Panel Compartment Assembly, Door, Striker, and Latch Replacement
.
- Remove the I/P driver knee bolster assembly. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P accessory trim plate. Refer to
Accessory Trim Plate, Driver Information Display Switch Replacement - Instrument Panel
.
- Remove the center I/P-A/C outlets. Refer to
Instrument Panel Air Outlet Ducts Replacement
.
- Remove the I/P cluster trim plate. Refer to
Cluster, Cluster Trim Plate Replacement - Instrument Panel
.
- Remove the I/P lower trim molding. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P steering column opening moldings. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P upper trim pad. Refer to
Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel
.
|
1
| I/P Carrier Trim Cover Screw (Qty: 4)
Tighten 2 N·m (18 lb in) |
2
| I/P Carrier Trim Cover Screw (Qty: 3)
Tighten 2 N·m (18 lb in) |
3
| I/P Carrier Trim Cover Screw (Qty: 2)
Tighten 2 N·m (18 lb in) |
4
| I/P Carrier Trim Cover Screw (Qty: 3)
Tighten 2 N·m (18 lb in) |
5
| I/P Carrier Trim Cover Screw (Qty: 2)
Tip The 2 screws go up into the carrier cover, and are located on each side of the passenger air bag module, and must be removed from inside of the I/P compartment opening.
Tighten 2 N·m (18 lb in) |
6
| I/P Carrier Trim Cover Screw (Qty: 2)
Tip The 2 screws go up into the carrier cover and can be removed from the center A/C outlet opening.
Tighten 2 N·m (18 lb in) |
7
| I/P Carrier Trim Cover Assembly
|
I/P Lower Extension Accessory Trim Panel Replacement
Preliminary Procedures
- Disable the SIR. Refer to
SIR Disabling and Enabling
and
SIR Disabling and Enabling
.
- Remove the I/P insulators. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P compartment assembly. Refer to
Instrument Panel Compartment Assembly, Door, Striker, and Latch Replacement
.
- Remove the I/P driver knee bolster assembly. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P accessory trim plate. Refer to
Accessory Trim Plate, Driver Information Display Switch Replacement - Instrument Panel
.
- Remove the I/P A/C outlets. Refer to
Instrument Panel Air Outlet Ducts Replacement
.
- Remove the I/P cluster trim plate. Refer to
Cluster, Cluster Trim Plate Replacement - Instrument Panel
.
- Remove the I/P lower trim molding. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P steering column opening moldings. Refer to
Knee Bolster, Insulator, Molding Replacement - Instrument Panel
.
- Remove the I/P upper trim pad. Refer to
Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel
.
- Remove the I/P cupholder . Refer to
Cupholder Replacement
.
|
1
| I/P Carrier Trim Cover Screw (Qty: 4)
Tighten 2 N·m (18 lb in) |
2
| I/P Carrier Trim Cover Screw (Qty: 3)
Tighten 2 N·m (18 lb in) |
3
| I/P Carrier Trim Cover Screw (Qty: 2)
Tighten 2 N·m (18 lb in) |
4
| I/P Carrier Trim Cover Screw (Qty: 3)
Tighten 2 N·m (18 lb in) |
5
| I/P Carrier Trim Cover Screw (Qty: 2)
Tip The 2 screws go up into the carrier cover, and are located on each side of the passenger air bag module, and must be removed from inside of the I/P compartment opening.
Tighten 2 N·m (18 lb in) |
6
| I/P Carrier Trim Cover Screw (Qty: 2)
Tip The 2 screws go up into the carrier cover and can be removed from the center A/C outlet opening.
Tighten 2 N·m (18 lb in) |
7
| I/P Carrier Trim Cover Assembly
|
8
| I/P Lower Extension Accessory Trim Panel Screw (Qty: 4)
Tighten 2 N·m (18 lb in) |
9
| I/P Lower Extension Accessory Trim Panel Screw (Qty: 2)
Tighten 2 N·m (18 lb in) |
10
| I/P Lower Extension Accessory Trim Panel Assembly
|