Tools Required
J 38778
Door Trim Pad Clip Remover
Removal Procedure
- Remove the upper seat belt anchor bolt from the belt guide loop.
Important: Use care to not break the locating tabs on the quarter trim when removing the back body pillar trim.
- Using
J 38778
remove the back body pillar trim from the vehicle.
Installation Procedure
- Install the back body pillar trim by aligning the trim with the locating tabs
on the quarter trim.
- Align the retainers in the holes and push to secure the retainers.
Notice: Refer to Fastener Notice in the Preface section.
- Install the upper seat belt anchor bolt to the belt guide loop.
Tighten
Tighten the bolt to 43 N·m (32 lb ft).